在天水酒店晚上怎么叫服务

 banner
News Center

High pressure water jet cleaning machine uses high-power heating elements, heating temperature

Time: June 19, 2020 09:12 source: unknown author: admin

    High pressure water jet cleaning machine Using high-power heating element, the heating temperature is uniform, which can ensure the fast and long-term supply of circulating high-pressure hot water, and ensure the time and quality requirements of cleaning oil. The fifth one is equipped with low water level automatic alarm and waterproof protection. ensure High pressure water jet cleaning machine High density inlet filter system can prevent debris from entering, and can master pressure stepless regulator and pressure gauge in time. Make sure the pressure changes.
 
High pressure water jet cleaning machine is driven by electric motor and electric heating mode. It is a high pressure cleaner for hot and cold water. It is suitable for oil treatment in food processing plants, hotels, kitchens, supermarkets, medical institutions, etc. Piping, oil and areas are clean, clean and free of exhaust emissions, High pressure water jet cleaning machine These areas show great advantages.
High pressure water jet cleaning machine is often turned off in the process of use
 
1. After opening the high pressure water jet cleaning machine, the washing machine has high pressure output, but the cleaning effect is not very good. There are many cases. The temperature of the liquid in the cleaning box is too high, so it is not suitable to use the cleaning fluid. In the case of not adjusting the high-pressure frequency coordination, the level of cleaning liquid in the cleaning tank is not appropriate.
 
2. The DC fuse of high voltage cleaner is blown out. The cause of this failure may be distillation bridge or power tube combustion or sensor failure.
 
3. When the power switch of high pressure water jet cleaning machine is turned on, the indicator light will go out. The cause of this fault may be that the fuse acfu or the power switch is damaged due to no power input.
 
4. When the power switch of high pressure water jet cleaning machine is turned on, the indicator light is not on. There may be many reasons for this failure, such as fuse dcfu fuse, sensor failure, sensor and high voltage power supply board connection. The plug is loose and the ultrasonic generator fails;