在天水酒店晚上怎么叫服务

 banner
News Center

Zhengzhou Guangyuan aluminum template automatic cleaning line launched in three weeks

Time: July 7, 2020 11:55 source: unknown author: admin

1、 Background of automation system for aluminum formwork cleaning system
Aluminum alloy formwork for building is a new generation of formwork system after wood formwork and steel formwork. It is pressure molded by special equipment, and can be freely combined according to different structural dimensions. It has good sealing performance, high flatness, light weight, and can be reused for many times. It can greatly improve the construction progress of the project, save construction materials and is widely used in the construction industry. However, due to the good adsorption capacity and poor ductility of aluminum formwork, it is difficult to remove the concrete attached to the formwork surface after construction, and the manual hand-held high-pressure water gun cleaning effect is not high. Therefore, intelligent, low procurement cost, high cleaning efficiency and good effect automatic cleaning equipment for aluminum formwork should be put into operation.
It uses highly intelligent Semi automatic control system, high efficiency, environmental protection and energy saving, low procurement cost is its pronoun, one key start, automatic induction mobile cleaning is its bonus items.
2、 Automation system technology of aluminum formwork cleaning
1) Automatic aluminum template configuration efficiency

1. The automatic cleaning device is its actuator. This actuator nozzle angle and the distance between the nozzle and the aluminum template are the results of accurate calculation and many tests. It can not only damage the surface of the template, but also ensure that the mud on the surface of the aluminum template is cleaned.
2. The cleaning efficiency of aluminum formwork is high, 40-50 square meters can be cleaned in one hour, and 15-20 tons of aluminum formwork can be cleaned in a day.
With manual hand-held high-pressure gun cleaning, edges and corners can be cleaned in place.

 
Aluminum formwork site to be cleaned by customers
2) Operational advantages
1. Three stage sedimentation setting: the washed water enters the sedimentation tank through the water tank, and is reused after sedimentation filtration to reduce the cost.
2. The integrated intelligent control system can minimize the energy loss in equipment operation.
3. The equipment is easy to operate, and it can be cleaned by 1-2 people, reducing the manpower demand.
3) Environmental protection
1. Pure high pressure water cleaning, no dust pollution on the cleaning site.
2. It does not use any chemical reagent, and the emission is safe and environmental protection.
 
Equipment cleaning site
3、 High return on investment
Automatic cleaning equipment for aluminum formwork Added value that can be created
1. The pressure can be adjusted within the rated pressure, which can be used to clean other building formwork climbing frame, formwork and other items that need to be washed and cleaned.
2. Rich configuration, the cleaning mechanism can be adjusted and replaced for other cleaning purposes.
3. High pressure water cleaning equipment is a new environmental protection equipment, which has a good application prospect, and the equipment elimination rate is almost zero.